TH2830 Benchtop Type LCR Meter with 4.3 inch TFT LCD,
10mVrms-2.0Vrms, 20Hz-100KHz
Programmable Features: Advanced LCR Meters often come with
programmable features, allowing users to automate measurement
sequences, save custom test setups, and streamline repetitive
testing processes.
Automatic Compensation: The LCR Meter may have automatic
compensation features for eliminating the effects of test lead
resistance or parasitic capacitance, ensuring accurate and precise
measurements.
Features
Low cost, high performance, small size
4.3 inch TFT LCD Display
Soft power switch
Selectable Chinese-English operation language
Max. 100kHz test frequency
Max. 6 digit reading resolution
10mVrms-2.0Vrms programmable signal level, built-in 0 -5V/50mA bias
source
DCR, 50mV-2V programmable test level, resolution 10
Ls-Rd / Lp-Rd Function (L, Rd display simultaneously) *
Highest test speed 13ms/time
Selectable 30/100 signal source impedance
V/I monitor and auto level adjustment function
Built-in comparator, 10 bins sorting and count function
File storage and firmware update through U disk
RS232, RS485, USB, HANDLER, GPIB interface
Brief Introduction
Adopting the latest technology & high density circuit design and
concentrating the essence of LCR test, TH283X series is a new
generation compact LCR meter of low cost and high performance.
Instead of traditional mechanical power switch, it adopts software
control power switch. The basic accuracy of 0.05% and good test
stability can compare favourably with those high-end models. Being
equipped with 4.3 inch TFT LCD Display and brand new interface
system, TH283X series LCR meters possess elegant appearance and
easy operation.
Also, being provided with various interfaces and good compatibility
with SCPI commands, TH283X series LCR meters are convenient for
constituting all kinds of test system and satisfy various kinds of
demands for inspection, production and scientific research.
Specifications
| Model | TH2830 | TH2832 |
| Display | 4.3 TFT LCD Display 480×272 |
| Basic accuracy | LCRZ | 0.05% | 0.05% |
| DCR | 0.10% |
| Test frequency | 50Hz-100kHz, Continuous | 20Hz-200kHz, Continuous |
| AC Singal | 10mVrms - 2Vrms; 100Arms - 20mArms |
| Output impedance | 30, 100 |
| RDC Signal level | 1V | 5mV - 2V |
| DC Bias | ------- | 0V -5V/0mA -50mA |
| Test parameters | L, C, R, |Z|, D, Q, |Y|, G, X, d, r, RDC, Vm, Im% |
| Test Speed (ms) | Fast: 12.5ms; Middle: 83 ms; Slow: 167 ms |
| List Sweep | 201 Dots. Parameter: Frequency, AC Voltage, AC Current, DC BIAS
Voltage, DC BIAS Current |
| Test Result Display | Measurement display 1: test status and results;
measurement display 2: sorting status and results |
| General Function | Series, parallel equivalent mode, test cable length: 0, 1m,
average: 1-255 times, calibration: open circuit, short circuit,
load, ALC function(only TH2832)
Range selection: automatic, manual, trigger mode: INT, MAN, EXT,
BUS, trigger delay: 0-999s, keyboard lock function |
| Special function | L-RDC simultaneous test, soft power switch, one-key screenshot
function, data recording function |
| Comparator function | 10 bins, BIN1BIN9, NG, AUX
Bin count function
PASS, FAIL LED display on front panel |
| Storage | Internal | 100 LCRZ instrument setting files, 201 times test results |
| USB External | Instrument setting files , measurement result CSV files, printed
screen (GIF format) |
Accessary
| Standard |
| Accessories name | Model | |
| Fixture | TH26048A | |
| Short circuit | TH26010 | |
| Kelvin test lead with box four-terminal i |
