1000W AC Power Supply for Electronic Production Design
An AC Power Supply, also known as an Alternating Current Power
Supply, is an electronic device used to provide electrical power in
the form of alternating current to various electrical and
electronic systems. It is a fundamental component in many
applications, including testing and development, research,
manufacturing, and educational settings.
Features
24-bit color 4.3-inch 480272 color LCD screen, Chinese and English
interfaces
Linear output design
Flexible and convenient operation: numeric keypad, coarse and fine
adjustment knob
Manual / program control mode output function, timing output
function, dimming mode output function, surge and notch function
Front panel output function
Boot hold function
Store setting parameters and test results
Support USB to upgrade the instrument firmware
Multiple protection modes: set the current protection (HI-A),
Overvoltage Protection (OVP), Low Voltage Protection (LVP),
Overcurrent protection (OCP), over power protection (OPP), Over
temperature protection (OTP)
Two-gear temperature to control fan speed
Remote input and output functions: Remote input: input control of 7
groups of memory
Remote output: PASS, FAIL, PROCESSING, internal output switch
Memory capacity: Manual, 50 groups; Program control, 50 groups, 9
steps / group
Application
Motors and transformers
Electronic production design
Lighting
Aerospace military
Network communication
Audio and video equipment
Monitoring equipment
Power specifications simulation of different countries
Electromagnetic compatibility equipment
Specifications
| Model | TH7105 | TH7110 | TH7120 |
| Output Parameters | | |
| Rated Power | 500W | 1000W | 2000W |
| Output Voltage | 0-300V |
| Output Frequency | 45.0Hz-500Hz |
| Maximum Current | 0-150V | 4.2A | 8.4A | 16.8A |
| (RMS) | 0-300V | 2.1A | 4.2A | 8.4A |
| MaximumCurrent | 0-150V | 16.8A | 33.6A | 67.2A |
| (Peak) | 0-300V | 8.4A | 16.8A | 33.6A |
| Total Harmonic Distortion (THD | at 45.0 -500Hz,0.5% (resistive load) |
Common
Parameters | Phase | 1/2W |
| Crest Factor | ≥4 |
| Linearity Adjustment Rate | 0.1%±10% |
| Load Regulation | 0.5%(resistive load) |
| Response Time | <100uS |
| Setting Parameters |
| Voltage | -300V |
| Resolution/Accuracy | 0.1V/±0.5%+2 digits |
| Frequency | 45.0Hz -500Hz |
| Resolution/Accuracy | <100Hz: 0.1Hz ; ≥100Hz: 1Hz/±0.02% |
| Initial / Final Phase Angle | - 359° |
| Resolution/Accuracy | 1°/±1°(45 - 65Hz) |
| Measurement Parameters |
| Voltage | - 300V |
| Resolution/Accuracy | 0.1V/±0.5%+2 digits |
| Frequency | 45.0Hz -500Hz |
| Resolution/Accuracy | <100Hz: 0.1Hz ; ≥100Hz: 1Hz/±0.1Hz |
| Current | 0-150V | 0.000 - 4.200A | 0.000 - 8.400A | 0.000 - 16.800A |
| 0-300V | 0.000 - 2.100A | 0.000 - 4.200A | 0.000 - 8.400A |
| Resolution | 0.001A |
| Accuracy | ±0.5%+5 digits |
| Peak Current | 0-150V | 0.00 - 16.80A | 0.00 - 33.60A | 0.00 - 67.20A |
| 0-300V | 0.00 - 8.40A | 0.00 - 16.80A | 0.00 - 33.60A |
| Resolution | 0.01A |
| Accuracy | ±5%+2 digits |
| Power | Range | 0-500W | 0- 1000W | 0-2000W |
| Resolution | 0.1W | 0.1W(0-1000W);
1W(1000-2000W) |
| Accuracy | ±0.6%+5 digits |
| Power Factor | 0.001-1.000 |
| Resolution/Accuracy | 0.001/±2%+2 digits |
